LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2010 >> Solstice Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Engine Mechanical - 2.0L - Repair Instructions - Off Vehicle (2 Of 2)) >> Oil Pan Installation

Oil Pan Installation

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Applying RTV Around Perimeter Of Oil Pan & Oil Suction Port Opening
    GM412541Courtesy of GENERAL MOTORS CORP.
  1. Ensure the oil pan and mounting surface on the lower crankcase are free of all oil and debris.
  2. Apply a 3.5 mm bead of sealant around the perimeter of the oil pan and the oil suction port opening. Refer to Adhesives, Fluids, Lubricants, and Sealers .
    3. Fig 2: Identifying Oil Pan
    GM412429Courtesy of GENERAL MOTORS CORP.
  3. Install the oil pan.
    4. Fig 3: Identifying Oil Pan Bolts Removal & Tightening Sequence
    GM466580Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  4. Install the oil pan bolts and tighten in sequence to 25 N.m (18 lb ft).
scientia non olet · About LEMON Manuals