LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2010 >> Solstice Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Engine Mechanical - 2.0L - Repair Instructions - Off Vehicle (2 Of 2)) >> Oil Level Indicator and Tube Installation

Oil Level Indicator and Tube Installation

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Oil Level Indicator Tube
    GM1769542Courtesy of GENERAL MOTORS CORP.
  1. Lubricate the oil level indicator tube O-ring. Refer to Adhesives, Fluids, Lubricants, and Sealers .
  2. Install the oil level indicator and the oil level indicator tube into the oil pan.
    3. CAUTION: Refer to Fastener Caution .
  3. Install the oil level indicator tube bracket to the intake manifold bolt. Tighten the oil level indicator bolt to 10 N.m (89 lb in).
  4. Install the electrical wiring harness to the oil level indicator tube.
  5. Install the knock sensor wiring clip into the oil level indicator tube.
scientia non olet · About LEMON Manuals