LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2010 >> Solstice Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Engine Mechanical - 2.0L - Repair Instructions - Off Vehicle (2 Of 2)) >> Engine Flywheel Installation (Automatic Transmission) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying Engine Flywheel & Automatic Transmission
    GM2146391Courtesy of GENERAL MOTORS CORP.
  1. Install the flywheel (1).
  2. Install the NEW bolts.
  3. Install J 43653:  tool in the starter assembly location, engaging the flywheel, in order to prevent crankshaft rotation.
    4. CAUTION: Refer to Fastener Caution .
  4. Tighten the flywheel bolts to 53 N.m (39 lb ft), plus 25 degrees, using J 45059:  meter.
scientia non olet · About LEMON Manuals