Diagnostic Aids
WARNING: This page is about a different variant/trim than selected.
The HO2S Heater diagnostic can be monitored on the scan tool under the I/M System Information selection of System Information. When the HO2S Heater test displays a YES status, indicating that the oxygen sensor heater diagnostic is completed, check for a DTC P0031, P0032, P0037, or P0038. If there is no DTC displayed the HO2S heater diagnostic has run and passed, indicating that no malfunction was present this time. The DTCs MUST be cleared in order to view the Current Status of the system diagnostics being performed. Do not forget that I/M System Information tests only indicate that the test has run, not whether the test passed or failed.