LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine Control System & Fuel System - 1.8L (Lay) - DTC P0010 To DTC P0420) >> DTC P0011 or P0014 >> Component Testing

Component Testing

WARNING: This page is about a different variant/trim than selected.
  1. Ignition OFF, disconnect the harness connector at the CMP actuator solenoid.
  2. Test for 6.9-7.9 ohms at 20°C (68°F) between the actuator solenoid terminals 1 and 2
    • If not within the specified range, replace the CMP actuator solenoid.
  3. Test for infinite resistance between each terminal and the solenoid housing.
    • If not the specified value, replace the CMP actuator solenoid valve.