Difficult to fill/Pre-mature shut-off of the fuel dispensing nozzle

WARNING: This page is about a different variant/trim than selected.

The fuel filler pipe check valve is stuck closed.
The fill limiter vent valve (FLVV) on the EVAP canister is stuck closed.
The EVAP canister air filter is restricted or dirty.
Any restricted vapor lines or hoses
The EVAP canister has an internal blockage or restriction.
A fuel with high reid vapor pressure characteristics.
A high fuel temperature
The fuel filler hose/pipe is pinched, kinked, or blocked.
A condition with the internal components of the fuel tank assembly.
For more information, refer to the following: