MIL Illumination
WARNING: This page is about a different variant/trim than selected.
- The MIL will illuminate with the ignition switch ON and the engine not running.
- The MIL will turn OFF when the engine is started.
- The MIL will remain ON if the self-diagnostic system has detected a malfunction.
- The MIL may turn OFF if the malfunction is no longer present.
- If the MIL is illuminated and then the engine stalls, the MIL will remain illuminated as long as the ignition switch is ON.
- If the MIL is not illuminated and the engine stalls, the MIL will not illuminate until the ignition switch is cycled OFF, then ON.