LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Mechanical - 1.8L (Lay)) >> Repair Instructions - On Vehicle >> Engine Block Heater Replacement (Manual Transmission) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Engine Block Heater Harness Plug Bundle
    GM2098395Courtesy of GENERAL MOTORS CORP.
  1. Unclip the engine block heater harness plug bundle from the resonator attachment flange.
    2. Fig 2: View Of Engine Block Heater Harness Retainer
    GM2098366Courtesy of GENERAL MOTORS CORP.
  2. Detach the engine block heater harness retainer from the battery harness.
    3. Fig 3: Locating Engine Block Heater Harness Retainer
    GM2098363Courtesy of GENERAL MOTORS CORP.
  3. Detach the engine block heater harness retainer from the engine harness.
    4. Fig 4: Locating Engine Block Heater Element Retaining Clip
    GM2098539Courtesy of GENERAL MOTORS CORP.
  4. Disengage the engine block heater element retaining clip from the engine block and remove the engine block heater assembly.
scientia non olet · About LEMON Manuals