LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Mechanical - 1.8L (Lay)) >> Repair Instructions - On Vehicle >> Drive Belt Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Engine Cover Attachments
    GM2016709Courtesy of GENERAL MOTORS CORP.
  1. Remove the engine cover. Refer to Engine Cover Replacement 
  2. Remove the engine under cover RH.
  3. Remove the V-ribbed belt.
      IMPORTANT: Do not loosen bolt D.
    1. Loosen bolts A and B.
    2. Loosen bolt C, then remove the V-ribbed belt.
scientia non olet · About LEMON Manuals