LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Mechanical - 1.8L (Lay)) >> Repair Instructions - Off Vehicle >> Crankshaft Rear Oil Seal Removal

Crankshaft Rear Oil Seal Removal

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Crankshaft Rear Oil Seal
    GM2017081Courtesy of GENERAL MOTORS CORP.
  1. Using a knife, cut off the rear engine oil seal lip.
  2. NOTE: After removing the oil seal, check the crankshaft for damage. If it is damaged, smooth the surface with 400-grit sandpaper.
  3. Using a screwdriver with its tip taped, pry out the rear engine oil seal.