LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Mechanical - 1.8L (Lay)) >> Repair Instructions - Off Vehicle >> Crankshaft Rear Oil Seal Installation

Crankshaft Rear Oil Seal Installation

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Proper Oil Seal Cleaning & Installation
    GM2017127Courtesy of GENERAL MOTORS CORP.
    NOTE:
    • Keep the lip free of foreign matter.
    • Do not tap on the oil seal at an angle.
  1. Install the rear engine oil seal.
  2. Using SST and a hammer, evenly tap the oil seal until its surface is flush with the rear oil seal retainer edge.
    3. NOTE: Wipe off extra grease on the crankshaft.
  3. Apply MP grease to a new oil seal lip.
  4. Install the oil pump assembly.
scientia non olet · About LEMON Manuals