LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Control System & Fuel System - 1.8L (Lay) - Introduction) >> Repair Instructions >> Positive Crankcase Ventilation Valve Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove intake manifold. Refer to Intake Manifold Replacement .
    2. Fig 1: Locating Ventilation Valve Sub-Assembly
    GM2016491Courtesy of GENERAL MOTORS CORP.
  2. Using the ball joint lock nut wrench (22 mm), remove the ventilation valve sub-assembly.
scientia non olet · About LEMON Manuals