Center Pillar Upper Garnish Molding Replacement

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Center Pillar Upper Garnish Molding & Components

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the seat belt from the seat. Refer to Seat Belt Retractor Pretensioner Replacement - Front
1	Upper Garnish Molding Cover
2	Upper Garnish Molding Screw CAUTION: Refer to Fastener Caution . Tighten 2 N.m (18 lb ft)
3	Center Pillar Upper Trim Panel Assembly TIP: Pull the trim panel toward the inside of the vehicle to disengage the retainers. Tighten 35 N.m (25 lb ft)