Back Body Opening Garnish Molding Replacement

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Door Frame Garnish Molding & Retainers

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedure Remove the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .
1	Retainer, Garnish Molding (Qty: 2) TIP: Use a plastic flat-bladed tool to remove the push-in retainers from the door.
2	Garnish Molding, Rear Door TIP: Pull the garnish molding off of the door window flange.