Instrument Panel Center Support Bracket Replacement

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Bracket - Instrument Panel (I/P) Center Support

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the instrument panel carrier assembly. Refer to Instrument Panel Carrier Replacement . Pull the carpet back enough to expose the instrument panel center support bracket bolts.
1	Instrument Panel Center Support Bracket Bolt (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten 25 N.m (18 lb ft)
2	Instrument Panel Center Support Bracket Assembly

Callout

Component Name

Preliminary Procedures

Remove the instrument panel carrier assembly. Refer to Instrument Panel Carrier Replacement .
Pull the carpet back enough to expose the instrument panel center support bracket bolts.

Instrument Panel Center Support Bracket Bolt (Qty: 4)

CAUTION:

Refer to Fastener Caution .

Tighten
25 N.m (18 lb ft)

Instrument Panel Center Support Bracket Assembly