Front Floor Console Cup Holder Replacement
WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Front Floor Console Cup Holder Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the front floor console trim panel. Refer to Front Floor Console Trim Plate Replacement . |
|
| 1 | Front Floor Console Cupholder Screw (Qty: 2)
CAUTION:
Refer to Fastener Caution . Tighten 2 N.m (18 lb in) |
| 2 | Front Floor Console Cupholder Assembly |
| 3 | Clip, Retainer (Qty: 4) |