LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 97 (Seat Hardware, Seat Trim, And Upholstery) >> Repair Instructions >> Rear Seat Cushion Cover and Pad Replacement

Rear Seat Cushion Cover and Pad Replacement

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Seat Cushion Cover & Pad
GM1571699Courtesy of GENERAL MOTORS COMPANY
Rear Seat Cushion Cover and Pad Replacement

Callout Component Name
Fastener Tightening Specifications:  Refer to Fastener Tightening Specifications .
Preliminary Procedure 
Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement .
1 Cover, Rear Seat Cushion
  1. Remove the staples that secure the seat cushion cover and pad to the seat cushion frame.
  2. The cover is secured to the pad with hook and loop fasteners.
2 Pad, Rear Seat Cushion
scientia non olet · About LEMON Manuals