LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Exterior Trim) >> Repair Instructions >> Hood Ornament Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Hood Ornament
    GM456020Courtesy of GENERAL MOTORS COMPANY
  1. Install the retainer in to the hood slot.
  2. Position the hood ornament to the hood.

    Align the tab on the ornament to the notch on the hood panel and push until the ornament locks into place.

  3. Close the hood.
scientia non olet · About LEMON Manuals