LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Fixed & MOVEABLE Window System) >> Repair Instructions >> Rear Window Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the rear window. Refer to Adhesive Installation of Stationary Windows .
  2. Connect the rear window defogger electrical connectors.
  3. Install the OnStar® antenna. Refer to Cellular Communications/Digital Radio Antenna Replacement .
  4. Install the rear sail panels. Refer to Sail Panel Replacement .
  5. CAUTION: Refer to Fastener Caution .
  6. Install the four rear window lower reveal molding screws.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

  7. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
  8. Close the rear compartment lid.