Rear Side Door Window Inner Sealing Strip Replacement

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Door Window Inner Sealing Strip

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedures Remove the interior trim panel. Refer to Front Side Door Trim Panel Replacement . Remove the rear door window reveal molding. Refer to Rear Side Door Window Reveal Molding Replacement .
1	Sealing Strip, Rear Door Window Inner Tip: Pull the sealing strip away from the window flange to remove.

Callout

Component Name

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

Remove the interior trim panel. Refer to Front Side Door Trim Panel Replacement .
Remove the rear door window reveal molding. Refer to Rear Side Door Window Reveal Molding Replacement .

Sealing Strip, Rear Door Window Inner
Tip: Pull the sealing strip away from the window flange to remove.

Fig 1: Sealing Strip Replacement - Rear Door Window Belt Inner

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedure: Remove the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .
1	Sealing Strip, Rear Door Belt Inner Tip: Pull the belt sealing strip off of the door flange.