LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 78 (Engine Mechanical - 4.6L (5 Of 5)) >> Repair Instructions - Off Vehicle (3 Of 3) >> Drive Belt Idler Pulley Installation

Drive Belt Idler Pulley Installation

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Drive Belt Idler Pulley Bolt
    GM522488Courtesy of GENERAL MOTORS CORP.
  1. Place the drive belt idler pulley and bolt in position.
    2. CAUTION: Refer to Fastener Caution .
  2. Tighten the drive belt idler pulley bolt and tighten to 50 N.m (37 lb ft).
scientia non olet · About LEMON Manuals