LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Engine Mechanical - 4.6L (3 Of 5)) >> Repair Instructions - On Vehicle (2 Of 2) >> Oil Pan Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Disconnecting/Connecting Engine Harness Electrical Connectors
    GM1663951Courtesy of GENERAL MOTORS CORP.
  1. Drain the engine oil. Refer to Engine Oil and Oil Filter Replacement .
  2. Remove the front exhaust manifold pipe. Refer to Exhaust Manifold Front Pipe Replacement .
  3. Disconnect the engine harness electrical connector (2) from the oil level sensor.
    4. Fig 2: View Of Oil Pan
    GM1663953Courtesy of GENERAL MOTORS CORP.
  4. Loosen the oil pan bolts (1).
  5. Remove the oil pan (2) and discard the oil pan gasket.
  6. Clean and inspect the oil pan, if necessary. Refer to Oil Pan Cleaning and Inspection .
scientia non olet · About LEMON Manuals