LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Engine Mechanical - 4.6L (3 Of 5)) >> Repair Instructions - Off Vehicle (1 Of 3) >> Engine Flywheel Removal >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying 8 Engine Flywheel Mounting Bolts
    GM1480384Courtesy of GENERAL MOTORS CORP.
  1. Loosen the 8 engine flywheel mounting bolts.
  2. Remove 7 of the 8 engine flywheel bolts leaving 1 bolt at the top of the crankshaft rotation.
  3. Grip the engine flywheel and remove the remaining bolt. Do not drop the engine flywheel when removing the final bolt.
    4. Fig 2: View Of J 44214 & Engine Block
    GM651420Courtesy of GENERAL MOTORS CORP.
  4. Remove the J 44214  from the engine block. See Special Tools .
scientia non olet · About LEMON Manuals