LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Engine Mechanical - 4.6L (3 Of 5)) >> Repair Instructions - Off Vehicle (1 Of 3) >> Crankshaft Balancer Removal >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: J 44214 Securing Engine Flywheel
    GM651418Courtesy of GENERAL MOTORS CORP.
  1. Install the J 44214  to the engine block. See Special Tools .
  2. Secure the flywheel in order to prevent crankshaft rotation.
    3. Fig 2: View of Crankshaft Balancer Bolt Threads
    GM350291Courtesy of GENERAL MOTORS CORP.
  3. Remove the crankshaft balancer bolt.
    4. Fig 3: View of J 41816 Removing Crankshaft Balancer
    GM52031Courtesy of GENERAL MOTORS CORP.
  4. Place the J 38416-2  in the end of the crankshaft. See Special Tools .
  5. Position the legs of the J 41816  onto the backside of the balancer inner hub. See Special Tools .
  6. Tighten the center screw on the puller until the balancer pulls clear of the crankshaft end.
    7. Fig 4: View of Crankshaft Balancer
    GM350288Courtesy of GENERAL MOTORS CORP.
  7. Remove the crankshaft balancer.
scientia non olet · About LEMON Manuals