LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Engine Mechanical - 4.6L (3 Of 5)) >> Repair Instructions - Off Vehicle (1 Of 3) >> Camshaft Cover Removal - Right Side >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Ignition Coil Ground Strap & Bolt
    GM1207139Courtesy of GENERAL MOTORS CORP.
  1. Remove the right camshaft cover ignition coil ground strap bolt.
  2. Remove the right cylinder head ignition coil ground strap bolt.
  3. Remove the right ignition coil ground strap.
    4. Fig 2: Identifying Camshaft Cover & Bolts
    GM522725Courtesy of GENERAL MOTORS CORP.
  4. Remove the camshaft cover bolts.
  5. Lift the camshaft cover from the cylinder head.
    6. Fig 3: Using Camshaft Holding Tool
    GM650538Courtesy of GENERAL MOTORS CORP.
  6. Install the J 44212  to the right cylinder head camshafts. See Special Tools .
scientia non olet · About LEMON Manuals