LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (Engine Mechanical - 4.6L (4 Of 5)) >> Repair Instructions - Off Vehicle (2 Of 3) >> Oil Pump Suction Pipe and Screen Assembly Installation

Oil Pump Suction Pipe and Screen Assembly Installation

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Oil Pump Pickup Tube Support Nut, Oil Manifold Mounting Bolt, & Oil Pump Pickup Tube
    GM798707Courtesy of GENERAL MOTORS CORP.
  1. Lubricate the silicone seal in the oil manifold plate. With a twisting motion, install the end of the oil pump pick-up tube (2).
    2. CAUTION: Refer to Fastener Caution .
  2. Install the oil pump pick-up retaining bolt (1) and nut (3).
    1. Tighten the oil pump pick-up tube nut to 24 N.m (18 lb ft) .
    2. Tighten the oil pump pick-up tube bolt to 10 N.m (89 lb in) .
scientia non olet · About LEMON Manuals