Circuit/System Verification
WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
- With no weight in the passenger seat observe the passenger seat belt status indicator. Turn ON the ignition, the indicator should illuminate for 5 seconds.
- If the indicator is always ON or always OFF, refer to Circuit/System Testing for Indicator Circuit Test.
- Ignition ON, monitor the Passenger Seat Belt Switch parameter while connecting and disconnecting the seat belt. The parameter should display Buckled and Unbuckled when changing seat belt states.
- If the parameter displays incorrectly, refer to Circuit/System Testing for Switch Circuit Test.