LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (Automatic Transmission - 4T80-E - DTC P0218 To DTC P2534) >> DTC P0961 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Start and idle the engine. Using the scan tool, select PC Solenoid under the Transmission Output Controls. Command several values of solenoid reference current from 0.1-1.1 amps and observe the PC Sol. Actual Current and the PC Sol. Ref. Current. The PC Sol. Actual Current should not vary from the PC Sol. Ref. Current by greater than 0.16 amp.