Circuit/System Verification
WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON, clear the DTC information with a scan tool. Observe the scan tool DTC information. Verify that DTC P0602 does not fail this ignition.
- If DTC P0602 failed this ignition, reprogram the TCM. If DTC P0602 resets, replace the TCM.
- Observe the DTC information with a scan tool. Verify that DTCs P0601, P0603, P0604, or P062F do not set this ignition cycle.
- If any of the DTCs P0601, P0603, P0604, or P062F are set this ignition cycle, replace the TCM.