LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Interior Trim And Paneling) >> Repair Instructions >> Pressure Relief Valve Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Releasing Pressure Release Valve from Quarter Panel
    GM105342Courtesy of GENERAL MOTORS CORP.
  1. Install the pressure relief valve to the vehicle.
  2. Press the pressure relief valve to the vehicle to engage the tabs.
  3. Install the respective side rear compartment trim panel. Refer to Rear Compartment Side Trim Replacement - Left Side  for the left side Rear Compartment Side Trim Replacement - Right Side  for the right side.
  4. Close the rear compartment lid.
scientia non olet · About LEMON Manuals