Center Pillar Upper Trim Panel Replacement

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Center Pillar Upper Trim Panel Replacement

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Upper Garnish Molding Cover
2	Upper Garnish Molding Screw CAUTION: Refer to Fastener Caution . Tighten: 2 N.m (18 lb ft)
3	Center Pillar Upper Trim Panel Assembly Tip: Remove the seat belt D-ring from the adjuster assembly. Pull the trim panel toward the inside of the vehicle to disengage the retainers. Tighten: 35 N.m (25 lb ft)

Callout

Component Name

Upper Garnish Molding Cover

Upper Garnish Molding Screw

CAUTION: Refer to Fastener Caution .

Tighten: 2 N.m (18 lb ft)

Center Pillar Upper Trim Panel Assembly
Tip:

Remove the seat belt D-ring from the adjuster assembly.
Pull the trim panel toward the inside of the vehicle to disengage the retainers.

Tighten: 35 N.m (25 lb ft)