Circuit/System Testing
WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the DR UNLATCH (LIMO) relay at the rear fuse block.
- Ignition ON, transaxle in Park, verify that a test lamp illuminates between the control circuit terminal 8 and ground.
- If the test lamp does not illuminate, test the control circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the BCM.
- If the circuit tests normal, test or replace the DR UNLATCH (LIMO) relay.