LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Automatic Transmission - 4T80-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - Off Vehicle >> Fluid Pan, Gasket, and Transfer Oil Pump Inlet Screen Removal

Fluid Pan, Gasket, and Transfer Oil Pump Inlet Screen Removal

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Bottom Pan, Scavenge Screens & Gasket
    GM509540Courtesy of GENERAL MOTORS CORP.
  1. Rotate the transmission so the bottom pan (59) faces up.
  2. Remove the sixteen 10 mm bottom pan bolts (62).
  3. Remove the bottom pan (59) and the gasket (61).
  4. Remove the left scavenge screen and its seal (51, 53).
  5. Remove the right scavenge screen and its seal (52, 53).
scientia non olet · About LEMON Manuals