LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Automatic Transmission - 4T80-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - Off Vehicle >> Final Drive Carrier/Differential Carrier Install

Final Drive Carrier/Differential Carrier Install

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Drive Carrier & Differential Carrier
    GM15506Courtesy of GENERAL MOTORS CORP.
  1. Install the sun gear (121) with the bushing side facing the differential (110).
  2. Install the final drive carrier (100) with the thrust bearing (102) secured on the sun gear side. Turn the unit until the unit meshes with the sun gear and the internal gear teeth.
  3. Install the left thrust washer (117). Install the left differential side gear (118).
    4. CAUTION: Refer to Fastener Caution .
  4. Place the transmission in Park using the manual shaft. Align the differential housing (110) locating dowels into holes in the differential carrier (100) for proper assembly. Attach the differential housing (110) with four bolts (119) and tighten using a star pattern to 70-76 N.m (52-56 lb ft).
scientia non olet · About LEMON Manuals