Adjustment Procedure
WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
- Set the J 21177-A to the inside diameter of the rear brake rotor (1). See Special Tools .
- Position the J 21177-A . See Special Tools .
- Turn the adjuster nut until the lining (1) just contacts the J 21177-A . See Special Tools .
- Repeat steps 1 through 3 for the opposite side.
- The clearance between the park brake shoe and the rotor is 0.660 mm 0.026 inches.