Removal Procedure

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Refer to Brake Fluid Irritant Warning .

CAUTION: Refer to Brake Fluid Effects on Paint and Electrical Components Caution .

Fig 1: Identifying Master Cylinder Reservoir

Courtesy of GENERAL MOTORS CORP.

NOTE: Do not reuse the brake fluid.

Remove the brake fluid from the master cylinder reservoir and discard in an approved container.
Disconnect the brake fluid level indicator switch electrical connector.
Carefully spread the master cylinder reservoir (1) locking tabs and lift the reservoir upward from the master cylinder.
Clean the area surrounding the master cylinder and the master cylinder body with denatured alcohol and a clean shop cloth.

Fig 2: Identifying Master Cylinder Reservoir Seals

Courtesy of GENERAL MOTORS CORP.

Remove the master cylinder reservoir seals (1).