LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Power Seat System) >> Diagnostic Information and Procedures >> DTC B1825, B1850, B1860, B2105, B2355, B2365, or B2375 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Ignition ON, observe the scan tool Driver Position Module, Driver Seat and Lumbar position sensor parameters. The readings should be between 0.22 volts and 4.75 volts and change while adjusting seat and lumbar positions.

scientia non olet · About LEMON Manuals