LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (Seat Heating System & Seat Cooling System) >> Repair Instructions >> Driver or Passenger Seat Cushion Ventilation Heating and Cooling Blower Replacement

Driver or Passenger Seat Cushion Ventilation Heating and Cooling Blower Replacement

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Driver or Passenger Seat Cushion Ventilation Heating and Cooling Blower
GM1574231Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedure

  1. Disable the SIR system. Refer to SIR Disabling and Enabling .
  2. Remove the front seat. Refer to Driver or Passenger Seat Replacement .
  3. Remove the front seat cushion cover and pad. Refer to Seat Cushion Trim Cover and Pad Replacement .
1 Seat Cushion Frame
Refer to Driver or Passenger Seat Cushion Frame Replacement .
2 Front Seat Cushion Blower Assembly Nut (Qty: 3)
CAUTION: Refer to Fastener Caution .

Tighten:  3 N.m (25 lb in)

3 Front Seat Cushion Blower Assembly
Tip:  Disconnect the electrical connector.