High Mount Stop Lamp Replacement
WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the rear interior compartment lid trim. Refer to Rear Compartment Lid Inner Panel Trim Replacement . |
|
| 1 | High Mounted Stop Lamp Assembly Electrical Connection Tip: Disconnect the electrical connector. |
| 2 | High Mounted Stop Lamp Nuts (Qty: 7)
CAUTION:
Refer to Fastener Caution
. Tip: Tighten nuts in sequence, as shown. Tighten: 3.5 N.m (31 lb in) |
| 3 | High Mounted Stop Lamp Locking Tabs Tip: Pinch both tabs at each side, second bolt in from the outer edge in order to remove the lamp housing from the rear compartment lid. |
| 4 | High Mounted Stop Lamp Assembly Tip: The high mounted stop lamp is serviced as a unit, light emitting diode (LED) assembly. |