Cornering Lamp Replacement
WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove either the LF or RF wheelhouse liner. Refer to Front Wheelhouse Liner Replacement . |
|
| 1 | Front Fog Lamp Wiring Harness Connector Tip: Disconnect the electrical harness connector from the forward lamp harness. |
| 2 | Cornering and Front Fog Lamp Assembly Retainers (Qty: 2) |
| 3 | Cornering and Front Fog Lamp Assembly Bolts (Qty: 2)
CAUTION:
Refer to Fastener Caution
.
Tighten: 6 N.m (53 lb in) |
| 4 | Cornering and Front Fog Lamp Assembly Tip: Rotate the rear edge of the cornering lamp inward to release the lamp from the front bumper energy absorber. |