LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Lighting System) >> Diagnostic Information and Procedures >> Stop Lamps Malfunction >> Circuit/System Description >> All Countries Except Japan, Korea, Taiwan

All Countries Except Japan, Korea, Taiwan

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

The brake pedal position sensor is used to sense the action of the driver application of the brake pedal. The brake pedal position sensor provides an analog voltage signal that will increase as the brake pedal is applied. The body control module (BCM) provides a low reference signal and a 5-volt reference voltage to the brake pedal position sensor. When the variable signal reaches a voltage threshold indicating the brakes have been applied, the BCM will apply battery positive voltage to the stop lamps, center high mounted stop lamp (CHMSL), transmission control module (TCM), and engine control module (ECM). Ground for the left tail lamp assembly and CHMSL is provided by G402 and ground for the right tail lamp assembly is provided by G403.

scientia non olet · About LEMON Manuals