Circuit/System Verification
WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON, observe the scan tool Parklamp Switch parameter while cycling the headlamp switch between the Park and Off positions. The parameter should cycle between Active and Inactive.
- If the parameter does not cycle between the specified values, refer to Circuit/System Testing for Headlamp Switch Malfunction.
- Ignition ON, command the Parking Lamps ON and OFF with a scan tool. Verify the park, license, and tail lamps turn ON and OFF between commanded states.
- If any of the parking lamps are always OFF or remain always ON, refer to the appropriate Circuit/System Testing for Park, License, and/or Tail Lamps Malfunction. - All Countries Except Japan, Korea, Taiwan or Japan, Korea, Taiwan Only.
- If just the license lamps on an Japan, Korean, Taiwan vehicle are always OFF, refer to Circuit/System Testing for License Lamps Malfunction. - Japan, Korea, Taiwan Only.