LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Lighting System) >> Diagnostic Information and Procedures >> Front Fog Lamps Malfunction >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Observe the scan tool Front Fog Lamps Switch parameter while pressing and releasing the fog lamp switch. The parameter should change between Active and Inactive.
    • If the parameter does change between the specified values, refer to Circuit/System Testing  for Fog Lamp Switch Malfunction.
  2. Ignition ON, with a test lamp connected to ground, probe each of the test points on the FOG Fuse while commanding the Fog Lamps ON and OFF with a scan tool. The test lamp should turn ON and OFF at one or both of the fuse test points when changing between commanded states.
    • If the test lamp is always OFF, or remains always ON, refer to Circuit/System Testing  for Fog Lamp PCB Relay Malfunction.
    • If the test lamp turns ON and OFF, refer to Circuit/System Testing  for Fog Lamps Malfunction.
  3. With the fog lamps ON, verify the fog lamp indicator is illuminated on the IPC.
scientia non olet · About LEMON Manuals