Windshield Heated Washer Fluid Indicator Always On
WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the X2 harness connector at the windshield washer solvent heater assembly.
- Ignition ON, the DIC should not display the HEATED WASHER FLUID WASHER SYSTEM OFF message.
- If displayed, test the heated washer fluid indicator control circuit for a short to ground. If the circuit tests normal, replace the instrument panel cluster.
- If all circuits test normal, replace the windshield washer solvent heater assembly.