LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Front Suspension System) >> Repair Instructions >> Stabilizer Shaft Insulator Replacement (FE1, FE3) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
    2. Fig 1: Identifying Stabilizer Shaft Insulator Brackets Retaining Bolts
    GM104995Courtesy of GENERAL MOTORS CORP.
  2. Remove the stabilizer shaft insulator bracket retaining bolts.
  3. Remove the stabilizer shaft insulator bracket.
  4. Using a pry bar, pry upwards and remove the stabilizer shaft insulator from the stabilizer shaft.
scientia non olet · About LEMON Manuals