LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Engine Mechanical - 4.6L (2 Of 5)) >> Repair Instructions - On Vehicle (1 Of 2) >> Valve Rocker Arm Replacement - Left Side >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the left camshafts. Refer to Camshaft Replacement - Left Side .
    2. Fig 1: Identifying Camshaft Followers
    GM609690Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: If the followers are being reused, arrange them so that they may be put back in their original locations.
  2. Remove the camshaft followers.
  3. Clean and inspect the rocker arms. Refer to Valve Rocker Arm Cleaning and Inspection .
scientia non olet · About LEMON Manuals