LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Engine Mechanical - 4.6L (2 Of 5)) >> Repair Instructions - On Vehicle (1 Of 2) >> Primary Camshaft Drive Chain Guide Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Primary Camshaft Drive Chain Guide & Bolts
    GM207533Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  1. Install the primary camshaft drive chain guide (1) and retaining bolts.

    Tighten:  Tighten the primary camshaft drive chain guide bolts to 25 N.m (18 lb ft).

  2. Install the front cover. Refer to Engine Front Cover Replacement .
scientia non olet · About LEMON Manuals