LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Engine Mechanical - 4.6L (2 Of 5)) >> Repair Instructions - On Vehicle (1 Of 2) >> Engine Mount Strut Replacement - Right Side >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Engine Mount Strut Bolt
    GM1660428Courtesy of GENERAL MOTORS CORP.
  1. Install the engine mount strut.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the engine mount strut bolt.

    Tighten:  Tighten the bolt to 70 N.m (52 lb ft).

    3. Fig 2: Identifying Surge Tank
    GM1660422Courtesy of GENERAL MOTORS CORP.
  3. Position the surge tank to the studs.
  4. Install the surge tank nuts and push pin retainer.

    Tighten:  Tighten the nuts to 6 N.m (53 lb in).

scientia non olet · About LEMON Manuals