LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Engine Mechanical - 4.6L (2 Of 5)) >> Repair Instructions - On Vehicle (1 Of 2) >> Engine Lift Bracket Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Engine Lift Bracket
    GM1660883Courtesy of GENERAL MOTORS CORP.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the transaxle brace lower bolt.
  3. Lower the vehicle.
  4. Remove the transaxle brace nuts.
    5. Fig 2: Identifying Engine Rear Lift Bracket Studs
    GM1660885Courtesy of GENERAL MOTORS CORP.
  5. Remove the engine lift bracket studs.
  6. Remove the engine lift bracket.
scientia non olet · About LEMON Manuals