LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Engine Mechanical - 4.6L (2 Of 5)) >> Repair Instructions - On Vehicle (1 Of 2) >> Engine Front Cover Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Engine Front Cover Bolts
    GM315077Courtesy of GENERAL MOTORS CORP.
  1. Remove the drive belt idler pulley. Refer to Drive Belt Idler Pulley Replacement .
  2. Remove the crankshaft balancer. Refer to Crankshaft Balancer Replacement .
  3. Remove the engine front cover bolts.
  4. Remove the engine front cover and gasket. The gasket is reusable. Do not discard unless it is damaged.
scientia non olet · About LEMON Manuals